VG Oil Hole Drill 3D/5D
  
This product ran at one of our customers in Appleton WI and the closest competitor was half the tool life!

Application
7mm drill size
.625” hole depth
Material:  Duplex Stainless 2205 31 Rockwell C

Running conditions
1500 RPM @ 9IPM
# of holes drilled 4,000
Linear inches: 2500

Learn more about the VG oil Hole Drill 3D/5D. 

SG-Low Spiral Taps

These taps were run at a customer in Michigan and tap life was more than 10 times the closest competitor!

This tap is designed for steels but the test results for this customer was in ductile and gray iron.

Features: 
• Made exclusively from Premium High Speed Steel (HSSE material)

• 15°Helix angle designed to achieve an easy flow of chips and maintain the strength of cutting edge.

• Flute shape has been designed to avoid chips from wrapping around the shank especially during horizontal tapping applications.

• Designed for tapping Pre-hardened steel, Die-steel, Tool Steels, Alloy Steels up to 40 Hrc.

• SG Coated (Tin+TiCN) coated to enhance abrasion resistance. SG coating is tough for harder applications and has a small coefficient of abrasion.

Learn more about Nachi SG-Low Spiral Taps.